OTTAWA C.QUARTZ UK COATING
Many people are familiar with carnauba wax and more recently, polymer sealants as a means of protecting their vehicle. These products offer some protection from UV and the environment but they are not in the same league with C.Quartz UK. Unlike waxes and sealants, C.Quartz UK adds a measurable 3µm thickness of condensed SiO2 nano particles with a proprietary bonding agent to create the best ceramic quartz coating available on the market in Ottawa. Unlike the durability of wax and sealants which is measured in months, C.Quartz’ durability is measured in years!
C.Quartz UK represents an evolution in nanotech ceramic paint coatings. In the development of C.Quartz, high strength, condensed nano particles were designed utilizing a new proprietary material to create an extremely tough, super high gloss coating which protects paint and other automotive surfaces from UVA and UVB rays, dirt, brake dust, iron contaminants, bugs, bird droppings, tar, and all sorts of environmental contaminants for two years.
C.Quartz coatings have developed a reputation among professionals as the richest, deepest, finest gloss coating available.
C.Quartz UK has been proven to resist fine swirls and scratches when properly maintained and cared for. It is important to use only high quality wash mitts and drying towels when washing your C.Quartz-installed car.
C.Quartz UK prevents any oxidization, stains, or other damage your paint for upwards of 3 years. The gloss properties will remain over that period of time as long as an application of ReLoad is applied every six months.
This quick video shows the liquid-resistant properties of the C.Quartz UK coating.
A test of C.Quartz UK’s scratch resistance.
This video of a BMW shows that even after a year, C.Quartz UK is still working hard to resist scratches, stains, and holograms.
LOOKING FOR THE BEST SEALANT FOR YOUR CAR’S PAINT?
REQUEST C.QUARTZ UK BELOW OR CALL US AT (613) 727-7000
FOR THE FASTEST RESPONSE, CALL US DURING OPERATING HOURS
REQUEST A QUOTE
AFTERCARE FOR YOUR C.QUARTZ
As time wears on, your C.Quartz finish will remain glossy for a minimum of two years. In the meantime, you will still need to wash your car! It’s highly recommended to use the C.Quartz line of detailing products.
To safely remove contaminants such as brake dust and road tar without damaging the finish, we recommend you use C.Quartz IronX.
For washing, use C.Quartz Reset.
It is best to return every six months or so for an application of C.Quartz Reload, consider it a “top-up” that will replenish your C.Quartz finish window tint film is a water-mounted product it may take up to 2 weeks to dry completely. During this drying period it is completely normal to see a light cloudiness in the film and/or small water bubbles.
I want the greatest shine possible. Is a C.Quartz UK coating really for me?
Yes, Definitely. C.Quartz UK adds a tremendous amount of gloss and occasional top ups increase the gloss to maintain a show car standard.
Will C.Quartz protect my car from rock chips?
No, no coating can prevent rock chips however it will protect the paint from road rash caused by tiny sand fragments at high speed. For rock chips we reccomend our XPEL paint protection film. This is something that should be installed prior to the application of C.Quartz UK.
Will C.Quartz UK protect my car from swirls?
C.Quartz UK resists swirls from washing better than any other wax, sealant, or protective coating on the market. No ceramic coating will be able to prevent swirls 100% but with proper care and technique you can drastically reduce the chance of getting them with C.Quartz. The most important thing you can do is use the supplies we have recommended above.
Will the sun have any effect after the car's been released to me?
Driving or parking in the sun has only positive effects on your coating helping it to fully cure even faster from the heat.
Can C.Quartz UK be applied on top of my XPEL clearbra?
Yes! In fact it will even help protect it from yellowing, fine swirls, and dirt.
How long until my car can get wet?
12-24 hours after your vehicle was coated it can be exposed to water. If wet before that time water should be blown off or safely wiped off before it dries on the surface. No water should touch your vehicle period for at least 2 hours in optimal temperatures.
How do I wash a C.Quartz UK installed vehicle?
We recommend using a brand-new wool wash mitt with C.Quartz Reset to wash and a dry with a microfibre towel for drying. Ask us for tips or training on how to safely and properly wash your vehicle.
Water repellency has faded some over time. Is something wrong?
Over time contaminants can build and affect the coating. The good news is simple treatments of IronX will dissolve the contaminants and a spray on/wipe off Reload treatment will revitalize and return the upper hydrophobic layer to its former glory.
Is there any tricks to applying Reload?
You should allow us to do your bi-annual application of Reload.
Should I let the dealership wash it?
Never allow a car dealership to wash your vehicle. They do not understand how to, nor do they have the time or equipment to do so without introducing swirls into your perfect finish.
When I picked up the car… I couldn’t believe my eyes, I can hardly put it into words. It looked better than it did the day I bought it.Alexi F.